Hello everyone welcome back.
Here is some indoor DVR footage I hope you enjoy.
This is a amazing upgrade from the Beta 75. The Beta75s has 820 14,000kv motors and a upgraded frame. The frame for the Beta75s seems to be even more rigid. The updated camera mount is fantastic and will provide much more support for the BetaFPV Z01 camera.
You will receive a single 550Mah LiHV battery along with the Beta 75s which boasts 5 minutes of flight time.
Here are the full specs
Weight: 38g (without battery)
Flight Controller: BETAFPV Brushed FC with OSD
Firmware Version: Betaflight BETAFLIGHTF3 3.2.0
Motor: 8x20mm coreless brushed motor, 14000KV
Receiver: Frsky D8 potocol / DSMX / Flysky Rx with AFHDS 2A protocol
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 40CH
Batterry: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 minutes
I highly recommend you pick one of these up. They are a perfect indoor and outdoor flier. Even in below freezing temps and 10 mph winds its still pushing around.
Check out the Beta 75s
Need more 550mah Batteries?
What I fly and what I use
BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
BetaFPV Z01 Camera
BetaFPV 230mah LiHV Batteries
BetaFPV Replacement Canopies
BNF Beta 75
FPV Goggles I use
Soldering Iron I use
I film all my videos with the Samsung Note 5
Thank you for watching!
Fly Safe & Fly Often